Print

Ask for help or report issues
Post Reply
orbiterred
Posts: 1
Joined: Tue Jul 05, 2022 3:40 pm

Print

Post by orbiterred »

Hey Guys,

I've setup my scale so that smallest resolution is .25" I have a design made that I'm quite happy with.

Any suggestions for how to get this out onto a piece of paper at the correct size?

Thanks,
Rob
GeometricGrapher
Posts: 11
Joined: Fri Jul 08, 2022 7:58 pm

Re: Print

Post by GeometricGrapher »

Hi Rob,

There should be a pop-out menu under "Save" that lets you save it as a SVG or PNG. From there you'd use your svg/png viewer to print out the image!

Hope that helps!
GG
sb13
Posts: 1
Joined: Tue Apr 04, 2023 4:25 pm

Re: Print

Post by sb13 »

I'm running into an issue printing and saving where the grid stops partway through my drawing when saved as an SVG or PNG, meaning I can't print with the whole drawing having gridlines. Any hints?
pfoxharp
Posts: 1
Joined: Fri Apr 28, 2023 2:35 pm

Re: Print

Post by pfoxharp »

I have the same question, sort of: I'd like to print without grid lines. Any way to do that?
VGP
Posts: 45
Joined: Sun May 22, 2022 8:47 am

Re: Print

Post by VGP »

I'm running into an issue printing and saving where the grid stops partway through my drawing when saved as an SVG or PNG, meaning I can't print with the whole drawing having gridlines. Any hints?
Zooming out before saving might help
I'd like to print without grid lines. Any way to do that?
Try toggling off 'show grid' and then saving as SVG.
Post Reply